To open the lock from the input panel, you must enter your user ID and PIN numbers. The default code manager code is ID: 01 PIN: 111111.
The procedure is as follows:
1. First press the # key. The lock will beep once, and the LCD display will prompt you for your ID.
2. Enter your ID and press # to move the cursor to the next line.
3. Enter your PIN. Press # again. If there is only one lock on a door it will open.
4. If there are locks on two doors, the LCD will prompt you to select the door to be opened.
| WHICH DOOR? (1 OR 2) |
Choose 1 or 2
Press #
The LCD displays which lock is opening (locked 
or unlocked 
).
| LOCK1 LOCK2 |
ENTRY ERRORS
If you make a mistake in your entry and press #, the lock beeps a series of short, fast beeps, and the following message is displayed. Wait for the lock to clear, (the date and time displays) and start your entry again.
| INVALID PIN OR TOUCH MEMORY |
You may also cancel an entry by pressing the * button, IF you havent already pressed #.
Applicable to:
6300
